Certification: | ISO |
---|---|
Connection: | Welding |
Surface Treatment: | Polishing |
Application: | Pump, Valve etc. |
Material: | PTFE Peek Upe |
Type: | Vs, HS, Sc Spring Seal |
Customization: |
---|
Suppliers with verified business licenses
The U-packing comprises a PTFE jacked bonded securely with the NBR or FKM/FPM energizer.
Used for Cameron FC gate valves and FL gate valves
Name
|
Material
|
U-packing
|
U-packing PTFE+FKM/FPM/NBR/HNBR Filled
|
Stem packing
|
The Spring loaded Filled PTFE Stem Packing,
Back up ring : PEEK ;
The spring seal: PTFE TFM
|
Direction for use
U-packing PTFE+FKM/FPM/NBR/HNBR Filled and the Spring loaded Filled PTFE Stem Packing are both Used for Cameron FC gate valves and FL gate valves
|
Spring energized seals are designed to handle a wide range of applications where traditional elastomers fail. It excels in applications with high-speeds, wide temperature ranges and those with corrosive media. The Spring energized seal is a sealing device consisting of a PTFE or other polymer, energized by a corrosion resistant metal spring. When the seal is seated in the gland, the spring is under compression applying force on the gland sealing surfaces thereby creating a tight barrier to prevent gas or fluids from leaking. The spring also provides resiliency to compensate for seal wear, gland misalignment or eccentricity. While spring force provides adequate force for sealing at low pressure, at high pressure the system pressure augments the spring force to provide an even tighter seal.
Spring energized seals design is based on three principles:
High-performance, engineered materials
U-cup style seal jackets
Metal spring energizers
MATERIALS
SPT combines material technology and seal design to optimize your sealing performance. The material technology uses high performance engineered polymers made from PTFE, PEEK, Polyimides, PPS and other polymer materials specified for your application.
SPRING ENERGIZED SEAL FEATURES
Temperature: -268°C (-450°F) to +316°C (+600°F)
Pressure: Vacuum up to 3448 bar (50,000 psi)
Low and controlled friction
Broad chemical resistance
Spring-energized seals made of PTFE are characterized by:
spring energized oil seal
The different shape of spring seal/ spring energized seal
1.V-spring seals are designed for used in high or low presseure dynamic reciprocationg or rotary applications.
2.Slanted Coil Spring Seals are for low friction, dynamic reciprocating and rotary applications. The seal produces a near flat load curve when compressed ( installed ). They provide constant predictable loads through their very wide deflection range.
3.Helical Spring seals are designed for used in static or slow, infrequent dynamic sealing application due to high compression load over a small deflection range, which make these seals suitable when low pressure or vacuum and very low temperature ( cryogenic ) are present.
Applications & Industries
Spring-energized PTFE Seals are suitable for service in the following industries:
Good service --- worth your trust
Factory direct sale ----Customized service for you
Energized PTFE Spring Seals:
Type | Use for | Technical | Application | Material |
Symmetric | standard heel groove | temperacture:-40~+260 °C ,speed ≤m/s:15,pressure≤ Mpa:45 | virtually all fluids,chemicals and gases | PTFE-filled stainless steel |
rod | standard heel groove | temperacture:-40~+260 °C ,speed ≤m/s:15,pressure≤ Mpa:45 | virtually all fluids,chemicals and gases | PTFE-filled stainless steel |
piston | standard heel groove | temperacture:-40~+260 °C ,speed ≤m/s:15,pressure≤ Mpa:45 | virtually all fluids,chemicals and gases | PTFE-filled stainless steel |
symetric for rod | flanged heel groove | temperacture:-40~+260 °C ,speed ≤m/s:2,pressure≤ Mpa:25 | virtually all fluids,chemicals and gases | PTFE-filled stainless steel |
high-low lip rod | flanged heel groove | temperacture:-40~+260 °C ,speed ≤m/s:2,pressure≤ Mpa:25 | virtually all fluids,chemicals and gases | PTFE-filled stainless steel |
inside | face seal | temperacture:-40~+260 °C ,speed:static or slow rotary,pressure≤ Mpa:45 | virtually all fluids,chemicals and gases | PTFE-filled stainless steel |
outside | face seal | temperacture:-40~+260 °C ,speed:static or slow rotary,pressure≤ Mpa:45 | virtually all fluids,chemicals and gases | PTFE-filled stainless steel |
Q1. Are you a factory or trading company?
We have factory in Xingtai and office in Shijiazhuang, Hebei Province with export license. Convenient Transportation. It's not far from the Zhengding international airport. We warmly welcome clients from all over the world to come to our factory for visit and cooperation.
Q2. What's your sample policy ?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3. If I don't like the style of yours, can you do something else?
We can open the mould for you first according to your samples or technical drawings. Mould costs are charged if you need the customized products.
Q4.What's your packing & payment terms?
1). Generally, plastic bag inside and carton box outside or according to the customer's requirements. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
2). For sample and small order, 100% Paypal. Western Union, T/T.
For bulk order, T/T 50% deposit and the balance should be finished before delivery from our factory
Q5. What's your Mode of Transportation & Delivery time ?
1). Small package will shipping by express such as DHL, TNT, UPS, FEDX and so on, Customer should undertake the shipping cost.
Big Volume products often shipping by air/sea, EXW, FOB, CIF, CFR is depend by customers.
2). Delivery time: Generally it is 5-7 working days if the good are in stock, or 10-21 working days after receiving your advance payment. The specific delivery time depends on the items and quantity of your order.
Q6. Why choose to cooperate with you? What's your advantage?
1). Strong point:We have our own factory,so the price can be competitive and the quality is reliable.
2). We can offer you a good after-sell service, prompt deliver.
3). We can provide various size and colors according to customers' requirements.
4). By long time testing, quality proved to be excellent.
5). Updated product design.
6). Advanced manufacturing process, with global standards.
7). We win by the high quality and then have a long-term business relationship.
Q7. How do you make our business long-term and good relationship?
1). We keep good quality and competitive price to ensure our customers benefit;
2). We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Contact Information
Suppliers with verified business licenses