| Customization: | Available |
|---|---|
| Material: | PTFE+FKM |
| Usage: | Gate Valves |
|
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Name | Shell Material | Filling Material |
| U packing | Virgin PTFE | 90 Duro /FKM |
| U packing | Virgin PTFE | NBR/Buna |
| U packing | Virgin Te-flon PTFE | HSN/HNBR |
| U-packing stem valve seals | |
| Shell Material | Virgin PTFE |
| Filling Material | 70/75/80/85/90 Durometer FKM/nbr/hnbr |
| Advantages |
1.Suitable for low pressure application |
| Working Pressure | 0~15000 PSI |
| Working Medium | Hydraulic fluids, crude oil, sour oil/gase, H2S, salty water |
| Application | FC gate valves |
| Size |
| 1-3/4 x 1 U-Packing |
| 2 x 1-1/4 U-Packing |
| 2-1/4 x 1-1/2 U-Packing |
| 2-3/8 x 1-5//8 U-Packing |
| 2-3/4 x 2 U-Packing |
| 3 x 2 U-Packing |
| 3-1/2 x 2-3/4 U-Packing |
Cone & "V" Style Packing
The stuffing box is perhaps the most important piece to your artificial lift surface hookup from the standpoint, it is your SEAL. The most important component to the stuffing box sealing, is the packing inside the stuffing box. B. Cone packing is available in sizes for all polished rods 1" through 1- 3/4" in sets of 4 (3 top cone and 1 bottom cone).
| U-packing stem valve seals | |
| Shell Material | Virgin PTFE |
| Filling Material | 70/75/80/85/90 Durometer FKM/nbr/hnbr |
| Advantages |
1.Suitable for low pressure application |
| Working Pressure | 0~15000 PSI |
| Working Medium | Hydraulic fluids, crude oil, sour oil/gase, H2S, salty water |
| Application | FC gate valves |
| Size |
| 1-3/4 x 1 U-Packing |
| 2 x 1-1/4 U-Packing |
| 2-1/4 x 1-1/2 U-Packing |
| 2-3/8 x 1-5//8 U-Packing |
| 2-3/4 x 2 U-Packing |
| 3 x 2 U-Packing |
| 3-1/2 x 2-3/4 U-Packing |
Cone & "V" Style Packing
The stuffing box is perhaps the most important piece to your artificial lift surface hookup from the standpoint, it is your SEAL. The most important component to the stuffing box sealing, is the packing inside the stuffing box. B. Cone packing is available in sizes for all polished rods 1" through 1- 3/4" in sets of 4 (3 top cone and 1 bottom cone).
| Soft Cone Packing For sweet crudes with high oil-to- water ratios and low abrasives PTFE Filled Cone Packing For sweet crudes low oil-to-water ratios and/or for reducing polish rod noise in noise-sensitive areas. Brass Filled Cone Packing For sweet crudes with high oil-to- water ratios and low abrasives. Good for reducing polished rod scale build up Hard Cone Packing For sweet crudes with low oil-to-water ratios Fluid Seal™ Cone Packing For 3000 PSI applications and Pressure energized seal High Temperature Cone Packing For steam injection wells producing sweet crude HSN Cone Packing Excellent For H2S and CO2 wells |
|
1. Nitrile Rubber 2. PTFE 3. Rubber & fiber
Feature
1.Good wear resistance 2.Good sealing performance 3.Good aging resistant performance
|
Advantages: 1. Meet API standards for design, materials, function and performance |
| Working Conditions | ||||
| Working Pressure | Working Temperature | Working Medium | Material | |
| 5000~15000PSI | PU, LU, PX, LX | Hydraulic fluids, crude oil, sour oil/gase, H2S, salty water | PEEK, Elgiloy/SS steel, Filled PTFE | |
Application Suggestion:
FLS valve, FLS-R valve
OD&ID Face Seal are 100% compatible with Cameron Type FLS and FLS-R Gate Valves. It consists of PEEK jacket with corrosion-resistant metal spring energizer. It is spring-loaded and pressure-energized to improve gate and seat service life. Compared with PTFE seals, it has higher strength and can handle higher temperature.
Material :
Wireline seals generally have two or more components which work together in tandem to give an effective sealing functionality. Wireline seals helps in containing or controlling the high wellbore pressure that originates because of back pressure or kick. The downhole equipment are passed inside the borehole over the wireline and thus, wireline seals helps in holding the wireline tightly and do not let the downhole equipment fall when the wireline is being pulled out of rope socket. Some of the types of wireline seals used in the oilfield are:
Hebei Si Pai Tuo Seals Technology Co., Ltd. is located in Julu Economic and Technological Development Zone, Xingtai City, Hebei Province, close to the expressway and convenient transportation. S P T Seals Company provides seals, gaskets, packings for the general industry, power generation/petrochemical, hydraulic, engineering machinery, oil and gas drilling and production stimulation, L N G, aerospace, nuclear and wind power, medical equipment and other industry markets. S P T has passed I S O 9 0 0 1 quality management system certification and has more than 20 years of experience in the production of seals.
We have rubber seal molding production workshops, P T F E seal production workshops, C N C turning production workshops, and mold processing workshop.
We Mainly focus on manufacturing oil and gas energy seals, hydraulic seals ---especially fabric reinforced Rotary shaft seals, Vee packing sets; Spring Energized seals, oil seals, pressure washer pump seals kits and so on.
Our major oilfield seals are Weco seals/Hammer union seals, U Packing/Valve stem packing for Gate valves, PEEK coiled tubing reel swivel repair kit, Plug Valve Seals kits,Swivel Joint Packing seals,Frac-Pump Packing ( Well service packing ), Rubber Sleeve,Rubber Piston,Pipe wiper, Valve Insert and seats,O rings, S-seal,P-seal,Bonded seal,Vee ring, PEEK face seal, P T F E lip seal,Metal and cap seal...Our products can withstand harsh environments and run well in harsh environments.
We have different types of hydraulic seals.Such as piston seals, rod seals, wiper seals,v packings and more.Inch and metric sizes are available .
Our Spring Energized Seals are made from thermoplastic or P T F E materials and application based spring styles Such as Helical,Slanted Coil, U & V are readily available or can be custom made.Spring Energized Seals are used for A E D seals,vacuum ,exreme pressure and
temperature ,high sureface speed ,non-lubricated systems ,and more .
We have customers from both domestic market and oversea market. Our Oversea business covers many countries and regions around the world, such as the United States, Canada, Russia, Germany, the United Kingdom and other European and American countries, as well as the Middle East, Southeast Asia and Australia. We have established long-term and stable partnerships with global oil service and equipment companies. We provide quality products, Timely delivery, meeting customer requirements, customized service, and 24-hour after-sales service.To be your reliable sealing partner is our goal.
Any inquiry freely send the inquiry to us .
Questions:
Q1. Are you a factory or trading company?
We have factory in Xingtai and office in Shijiazhuang, Hebei Province with export license. Convenient Transportation. It's not far from the Zhengding international airport. We warmly welcome clients from all over the world to come to our factory for visit and cooperation.
Q2. What's your sample policy ?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q3. If I don't like the style of yours, can you do something else?
We can open the mould for you first according to your samples or technical drawings. Mould costs are charged if you need the customized products.
Q4.What's your packing & payment terms?
1). Generally, plastic bag inside and carton box outside or according to the customer's requirements. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
2). For sample and small order, 100% Paypal. Western Union, T/T.
For bulk order, T/T 50% deposit and the balance should be finished before delivery from our factory
Q5. What's your Mode of Transportation & Delivery time ?
1). Small package will shipping by express such as DHL, TNT, UPS, FEDX and so on, Customer should undertake the shipping cost.
Big Volume products often shipping by air/sea, EXW, FOB, CIF, CFR is depend by customers.
2). Delivery time: Generally it is 5-7 working days if the good are in stock, or 10-21 working days after receiving your advance payment. The specific delivery time depends on the items and quantity of your order.
Q6. Why choose to cooperate with you? What's your advantage?
1). Strong point:We have our own factory,so the price can be competitive and the quality is reliable.
2). We can offer you a good after-sell service, prompt deliver.
3). We can provide various size and colors according to customers' requirements.
4). By long time testing, quality proved to be excellent.
5). Updated product design.
6). Advanced manufacturing process, with global standards.
7). We win by the high quality and then have a long-term business relationship.
Q7. How do you make our business long-term and good relationship?
1). We keep good quality and competitive price to ensure our customers benefit;
2). We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
| kinds of Oil seal | Hammer union seals /Weco seals | U-packing stem packing seals for gate valves |
| Swivel Joint seals kits | U-packing filled NBR with PTFE Jacket | Hydraulic Piston seals KDAS /DAS |
| 2",3",4"Swivel Joint packing kits fig 1502,1002 | Well service plunger packing for pump | Hydraulic Chevron packing/Vee packing sets |
){kind=link}