Fmc Chiksan Swivel Joint 2inch Fig 1502 3 Inch Swivel Joint Seal Kit Repair Kit

Product Description

 

Product Description

FMC Chiksan Packing Kit for Swivel Joints

FMC swivel joint packing kits Seal Ring for Repair Kit includes SJP seals ,ball plug ,rubber wiper seals , metal balls and o rings

Swivel Joint Seal is the composite seal which consist of rubber ring and resin ring for a hydraulic turning unit like a swivel joint of hydraulic excavator. The optimum design with the rubber ring and the resin ring can achieve the good sealing performance.

Buna/Brass swivel packing seals, we can also produce the packing seal kit for you.
HNBR/Brass 

1). MODEL APPLIED: Replacement part swivel joint seal kit for Fig1002, 1502. 
2). MATERIAL PROPERTIES: Resistance to Friction and Wear, Weather Resistance, Oil Resistance, Non-toxic, Safety and Long-Time Uses, High and Low Pressure Resistance. 
3). SATISFACTION WARRANTY: We offer repair service or exchange service for free. 

 

1502/1002/602 Swivel Joint packing seals for Pressure manifold

 

Size :

2" ,3"narrow and wide;1502 4inch and 1002inch swivel packing 

Material :

Seal parts NBR,FKM /FPM,HNBR/HSN ;

Back up ring Brass or stainess steel 

 

2" BUNA/BRASS SWIVEL JOINT PACKING

2" OVERSIZED BUNA/BRASS SWIVEL JOINT PACKING

2" SWIVEL JOINT REPAIR KIT

3" BUNA/BRASS SWIVEL JOINT PACKING

3" SWIVEL JOINT REPAIR KIT

Material	Buna ,NBR, HSN ,HNBR,FKM,FPM,Flourelastomer
Color	Black
Fig	1002,1502 Weco FMC Chiksa Swivel Joint
Size	2inch ,3inch,4inch
Pressure	11250-15000psi cold working pressure

Product Parameters

2" Swivel Packing repair kit	QTY
2" Packing	1
2" Dust Seal	2
2" O-Ring	1
2" 3/8" Ball Plug	3
3" Swivel Packing repair kit
3" Wide SJ Packing	1
3" Narrow SJ Packing	1
3" Dust Seal	2
3" Narrow O-Ring	1
3" Wide O-Ring	1
3" Ball Plug	3
4" Fig1002 Swivel Packing repair kit
4" Fig 1002 Packing	1
4" Fig 1002 Dust Seal	2
4" Fig 1002 O-Ring	1
4" Fig 1002 Ball Plug	3
4" Fig1502 Swivel Packing repair kit
4" Fig 1502 Packing	1
4" Fig 1502 Dust Seal	2
4" Fig 1502 O-Ring	1
4" Fig 1502 Ball Plug	3

 

 

Color	Material
Black	NBR/FKM/HNBR with Brass or Stainless Steel
Blue	FKM with Stainless Steel
Yellow	Fkm With Stainless steel
White	PTFE
Note	Material and color descriptions are only for seals shown in the picture on the left

 

Hammer union seals are used in the connections between flexible hoses or pipes used in the oil drilling industry. The seal provides a critical fluid tight connection within the union hardware. Hammer unions consist of a thread end, a nut end, and a hammer nut that when tightened seal the assembly with the assistance of an elastomeric seal. The seal is lipped to prevent it from falling out when inverted. Some profiles such as Fig 2202, Fig 1004, Fig 1502, Fig 2002, Fig 602, Fig 1002 etc require a Hammer Union Lip Seal or an 'O'Ring depending on the Size of the Hammer Union. We produce 2",3", and 4" Hammer Union Seals in Nitrile for standard service and in  FKM or HNBR for Sour Gas Service. In addition to the standard molded rubber seals, we offer these with either a brass or stainless steel anti-extrusion ring. Also available in PTFE,PU

Size Chart of hammer union seals 

Size	2"	3"	4"
Material	Hammer Union Seals in Nitrile for standard service and in FKM or HNBR for Sour Gas Service. In addition to the standard molded rubber seals, we offer these with either a brass or stainless steel anti-extrusion ring. Also available in PTFE,PU
Pressure	6000psi to 15000psi
Hardness	75Shore A to 95 Shore A

 

Company Profile

Packaging & Shipping

FAQ

Q1. Are you a factory or trading company?
We have factory in Xingtai and office in Shijiazhuang, Hebei Province. Convenient Transportation. It's not far from the Zhengding international airport. We warmly welcome clients from all over the world to come to our factory for visit and cooperation.

Q2. What's your sample policy ?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q3. Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q4. What's your Delivery time ?
If the good are in stock generally it is 3-5 working days after receiving your advance payment.
About 7-15 working days if we have mold or 21-28 working days without mold.
The specific delivery time depends on the items and quantity of your order quantity.

Q5.What's your payment terms?
For sample and small order, 100% Paypal. Western Union, T/T.
For bulk order, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q6. Why choose to cooperate with you? What's your advantage?
1). Strong point:We have our own factory,so the price can be competitive and the quality is reliable.
2). We can offer you a good after-sell service, prompt deliver.
3). We can provide various size and colors according to customers' requirements.
4). By long time testing, quality proved to be excellent.
5). Updated product design.
6). Advanced manufacturing process, with global standards.
7). We win by the high quality and then have a long-term business relationship.

Q7. How do you make our business long-term and good relationship?
1). We keep good quality and competitive price to ensure our customers benefit;
2). We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Our rubber seals are diverse and extensive, so if there is no item what you need, we encourage you to send the drawing or samples to us directly for more information.