| Customization: | Available |
|---|---|
| Material: | PTFE+Spring+Carbon |
| Application: | Rod |
|
Still deciding? Get samples of US$ 3.88/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Application and properties
Suitable for reciprocating piston rod or piston single acting seal, the working pressure has a wide range of adaptability, and the pressure capacity can be enhanced by increasing the tail length size or increasing the check ring.
Small friction coefficient, The contact pressure between the mating surface and the mating surface is low, and the friction between the work face and the mating surface is the smallest in all seal types. with or without lubrication can work, wear resistance, long service life.
The working medium of the sealing sleeve has wide adaptability, and the other chemicals are not reacted except soluble alkali metal, high temperature fluorine gas and three fluoride chloride.
The working temperature range is wide, and can be used for -200 ºC to +250 ºC.
It can be used for very high speed, very low speed, micro-stroke and other special conditions.
Suitable for aviation and industrial sealing groove size, The standard installation groove is the same size as the standard O ring, and the size is small. It can be designed as non standard parts to meet the sealing requirements of any size groove. The groove is open or semi open.
It can be used in rotary sealing. It can adapt to large eccentricity and beating.
2. Standard materials
Sealing sleeve: PTFE
Spring: Stainless steel 304, 316
3. Working Conditions
|
Working Conditions |
||||
|
Diameter Range |
Pressure Range |
Temperature Range ºC |
Speed |
Medium |
|
3 - 1600mm |
0 - 20MPa |
-200 ~ +250 |
5 m/s |
High and low temperature oil and water and other fluids. |
4. Application Example
Radial Seals in Static Service.
Radial Seals in Reciprocating Motion.
Radial Seals in Rotary Motion.
Inside face Seals in Static and rotary Service.
Outside face Seals in Static and rotary Service.
5.Spring type:
U shaped spring
V shaped spring
Round wire spring
O shaped spring
| Name | PTFE Stain Steel Spring Energized Seals Valve Seal |
| Sliding speed[m/s] | 15 |
| Temperature [° C] | -40...+260 For specific applications beyond indicated range, please enquire. |
| Pressure Pr: N/mm² (Max) | 45 |
| Medium | Virtually all fluids, chemicals and gases |
| Material | Virgin PTFE, PTFE+carbon, PTFE+glass fiber, PTFE+bronze, PTFE+polyester, PEEK etc. Other special material is also available. |
| Color | coffee, white, black, blue, beige |
| Type of spring | V-spring, Helical Spring, Slanted Coil Spring |
| Size | Supply standard and non-standard size |
| Advantages | 1. Resistant to most fluids and chemicals 2. Low coefficients of friction 3. Stick-slip-free operating for precise control 4. High abrasion resistance and dimensional stability 5. Can handle rapid changes in temperature 6. No contamination in contact with foodstuffs. pharmaceutical and medicinal fluids. 7. High temperature range 8. Sterilisable 9. Unlimited shelf life. |
| Application | Valves Pumps Separators Actuators Dosing devices |
| Certificates | ISO9001-2015, SGS |
Oil seal edge, elastomer The sealing lip short and soft with spring With dustproof lip Resistance to pressure oil seal, of a whole in the larger diameter used under high pressure Used for sealing pressure situations.
The inner layer is corrugated paper, and the film is shrinkable. The outer box is wrapped with film.
Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,
Payment Currency:USD,EUR,CNY,
Payment Type: T/T,MoneyGram,Credit Card,PayPal,Western Union.
Cathy (Sales Manager)
Hebei SPT Seals Technology Co., Ltd.
){kind=link}