Replacement Elastomer Lip Seal for Hammer Unions

• Customization: Available
• Type: Oil Seal
• Performance: Wear
• Model NO.: HM
• Shape: O-Ring
• Standard: Standard, Nonstandard
• Applicication: Oil Field
• Resistant: Oil Resistance
• Preasure: High Pressure
• Speed: High Speed
• Transport Package: Carton
• Specification: 2"3"4"5"
• Trademark: SPT
• Origin: Heb

Product Description

 

Product Description

 

1502/1002/602 Swivel Joint packing seals for Pressure manifold
Size :

2" ,3"narrow and wide;1502 4inch and 1002inch swivel packing 

Material :

Seal parts NBR,FKM /FPM,HNBR/HSN ;

Back up ring Brass or stainess steel 

Include :one piece swivel packing seal;two piece of swivel dust /wipper seals;three pieces  swivel joint ball plug  and one  o rings 

 

Name	Plug Valve Seals and Kits
Size	1inch and 2inch
1inch and 2inch	NBR+Brass /SS ;FKM+Brass /SS ;HNBR W/Brass back up or Stainless steel Back up
Application	Oil&Gas sealing flowline ; 1502 ,1002 Plug valves
Pressure	15000psi
Color	Black

 

Hammer union seals are used in the connections between flexible hoses or pipes used in the oil drilling industry. The seal provides a critical fluidtight connection within the union hardware. Hammer unions consist of a thread end, a nut end, and a hammer nut that when tightened seal the assembly with the assistance of an elastomeric seal. The seal is lipped to prevent it from falling out when inverted. Some profiles such as Fig 2202, Fig 1004, Fig 1502, Fig 2002, Fig 602, Fig 1002 etc require a Hammer Union Lip Seal or an 'O'Ring depending on the Size of the Hammer Union. We produce 2",3", and 4" Hammer Union Seals in Nitrile for standard service and in  FKM or HNBR for Sour Gas Service. In addition to thstandard molded rubber seals, we offer these with either a brass or stainless steel anti-extrusion ring. Also available in PTFE,PU

color	Material
Black	NBR/FKM/HNBR with Brass or Stainless Steel
Blue	FKM with Stainless Steel
Yellow	Fkm With Stainless steel
White	PTFE
Note	Material and color descriptions are only for seals shown in the picture on the left

 

Direction for use


Hammer unions consist of a thread end, a
nut end, and a hammer nut that when tightened
seal the assembly with the assistance of an
elastomeric seal. The seal is lipped to prevent
it from falling out when inverted. This sealing
we call it hammer union seal/weco seal or
seal ring 

 

          

Size	2"	3"	4"
Material	Hammer Union Seals in Nitrile for standard service and in FKM or HNBR for Sour Gas Service. In addition to the standard moldedrubber seals, we offer these with either a brass or stainless steel anti-extrusion ring. Also available in PTFE,PU
Pressure	6000psi to 15000psi
Hardness	75Shore A to 95 Shore A

 

• High-Pressure Services (6,000 to 20,000 psi)

  Hammer Unions for high-pressure services feature a replaceable, lip-type seal ring in the female sub. This primary seal protects the secondary metal-to-metal seal from abrasion and corrosion while minimizing flow turbulence.

• Non-Pressure Seal Thread Hammer Union

  This type is especially designed for abrasive, high-pressure (15,000 psi) Hammer Union services where welded connections are undesirable. This design provides strong, permanent end connections without butt welding. The union ends are shop assembled to pipe or tubing. An epoxy thread compound is used to secure the connection. Since all threads are isolated from the fluid line, the resulting smooth bore assures minimum turbulence, decreased washout and reduced buildup around pipe ends of acid, sand, cement or chemicals. Connecting threads are API 10 round.

 

Products

 

Packaging & Shipping

Process

Certifications

 

 

Company Profile

   
 

FAQ

Q1. Are you a factory or trading company?  We have factory in Xingtai and office in Shijiazhuang, Hebei Province. Convenient Transportation. It's not far from the Zhengding international airport. We warmly welcome clients from all over the world to come to our factory for visit and cooperation. 

Q2. What's your sample policy ? We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. 

Q3. Can you produce according to the samples or drawings?   Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q4. What's your Delivery time ? If the good are in stock generally it is 3-5 working days after receiving your advance payment. About 7-15 working days if we have mold or 21-28 working days without mold.  The specific delivery time depends on the items and quantity of your order quantity. 

Q5.What's your payment terms? For sample and small order, 100% Paypal. Western Union, T/T.  For bulk order, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q6. Why choose to cooperate with you? What's your advantage?  1). Strong point:We have our own factory,so the price can be competitive and the quality is reliable.  2). We can offer you a good after-sell service, prompt deliver.  3). We can provide various size and colors according to customers' requirements. 4). By long time testing, quality proved to be excellent.  5). Updated product design.  6). Advanced manufacturing process, with global standards. 7). We win by the high quality and then have a long-term business relationship. 

Q7. How do you make our business long-term and good relationship? 1). We keep good quality and competitive price to ensure our customers benefit;  2). We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.  Our rubber seals are diverse and extensive, so if there is no item what you need, we encourage you to send the drawing or samples to us directly for more information.
 

Connection

Cathy (Sales Manager)
Hebei SPT Seals Technology Co., Ltd.