2" ,3" Buna Union seals 1502 for Trash Catcher Manifold
Spt produces a full line of Hammer Union Seals for use on flow lines. These Hammer union Seals are designed to seal on a Figure 1502 unions with typical pressure ratings for standard service of 15,000 PSI and are tested to 22,500 PSI. SPT seals also produced a line of HNBR Hammer Union Seals for Sour Gas Service. The standard Hammer Union Seal is produced from an elastomer; however, SPT Seals produces a line of HUS seals with Brass backup rings as well as a line with stainless steel backups. So no matter what your application requires SPTSeals can produce the seal you need. For other material configurations or nonstandard sizes contact your SPT Seals sales associate.
| 1.What is Harmmer Union seals ? |
A hammer union comprises of a thread end, a nut end and a hammer nut which, when cinched up, compresses a composite seal assembly thereby preventing leakage. The seal assembly comprises a metal insert of a size to pass into the seal groove of conventional hammer unions and a small seal acting between the insert, the thread end and the nut end. The small seal is conveniently an O-ring or a Hammer Union Seal (Lip Seal) and is of a size that is compressed when the seal assembly is inserted into the thread end of the hammer union, thereby preventing the seal assembly from falling out of the threaded end when it is inverted.
Some profiles such as Fig 2202, Fig 1004, Fig 1502, Fig 2002, Fig 602, Fig 1002 etc require a Hammer Union Lip Seal or an 'O'Ring depending on the Size of the Hammer Union. |
| 2.Which material Harmmer Union seals do you produce ? |
We produce Hammer Union Seals (Lip Seals) for Standard Service in NBR, FKM and HNBR. The manufacturing process is closely monitored so as to gurantee the correct hardness and composition.
We also produce special Hammer Union Seals (Lip Seals) in materials that resist explosive decompression for safety and reliability. We manufacture compatible Hammer Union Seals for Weco Hammer Union Seals and Guiberson Hammer Union Seals.
|
| 3.Which sizes Harmmer union seals do you need ? |
| Part number |
Hammer Union seals |
| NBR90 |
| HU 2 NBR90 |
2" |
| HU 2 NBR90-BU |
2" With Brass |
| HU 2 NBR90-BUSS |
2" With Stainless steel |
| HU 3 NBR90 |
3" |
| HU 3 NBR90-BU |
3" With Brass |
| HU 3 NBR90-BUSS |
3" With Stainless steel |
| HU 4 NBR90 |
4" |
| HU 4 NBR90-BU |
4" With Brass |
| HU 4 NBR90-BUSS |
4" With Stainless steel |
| HNBR90 |
| HU 2 HNBR90 |
2" |
| HU 2 HNBR90-BU |
2" With Brass |
| HU 2 HNBR90-BUSS |
2" With Stainless steel |
| HU 3 HNBR90 |
3" |
| HU 3 HNBR90-BU |
3" With Brass |
| HU 3 HNBR90-BUSS |
3" With Stainless steel |
| HU 4 HNBR90 |
4" |
| HU 4 HNBR90-BU |
4" With Brass |
| HU 4 HNBR90-BUSS |
4" With Stainless steel |
| FKM90 |
| HU 2 FKM90 |
2" |
| HU 2 FKM90-BU |
2" With Brass |
| HU 2 FKM90-BUSS |
2" With Stainless steel |
| HU 3 FKM90 |
3" |
| HU 3 FKM90-BU |
3" With Brass |
| HU 3 FKM90-BUSS |
3" With Stainless steel |
| HU 4 FKM90 |
4" |
| HU 4 FKM90-BU |
4" With Brass |
| HU 4 FKM90-BUSS |
4" With Stainless steel |
| |
|
| |
PTFE /TPU /Hytrel |
| 2" |
|
| 3" |
|
Please contact us for more information on our Hammer Union Seals (Lip Seals).
Materials: Union Seals in 1" to 4" line pipe sizes in:
80 Nitrile
80 FKM
90 fkm
80 HNBR
SPT Produce & sells a variety of seals for use in rotary and shaft solutions. These include oil seals, grease seals, shaft seals, mechanical seals, and braided packing. Seals are available in several different configurations including, but not limited to: single lip or double lip, with or without a spring, as well as a two spring lip format.
Oil Seals are used to seal around a rotating shaft and keep an oil-based lubricant inside an axle, engine, etc. Grease seals are used to seal more viscous grease lubricants in rotary shaft applications. For all automotive, motorcycle, agricultural and industrial equipment applications, We provides a broad range of oil and grease seals in a wide variety of styles, sizes and materials to fit your application.
SPT Hydraulic Seals
Hydraulic seals refer to any type of seal used in a fluid system. They are available in many different sizes and materials, often custom-designed to fit a particular appliance. We stock a range of durable and hard-working hydraulic seals for use across a range of industries.
At SPT our specialists can help talk you through the ordering process and set you up with a hydraulic seal that suits your needs.
Styles:
We can provide you with an extensive selection of hydraulic seal styles, each of which provide specific function based on the machines you use.
These include:
Piston Seals, Wipers, Rod Seals, Pressure Seals, Single & Double Acting Piston Seals, Rod Composite, Piston Composite, Fluid Seals, Guide Rings,Wear Rings,U Rings,Vee Packs,Chevron Seals,PTFE Back Up Rings(also called anti-extrusion rings).
Please get in touch if you need assistance selecting the most suitable style for your business.
Materials
Modern hydraulic seals are constructed from a variety of different plastics, metals and hard wearing compounds. Your choice will greatly depend on the hydraulic fluid you use and the nature of the appliance.
Materials include:
Nitrile, Polyurethane FDA, Polyurethane-H (High Performance), FKM, Fluor silicone Rubber, EPDM, Silicone, Hytrel, Kalrez, Aflas, Nylon, Acetal, Peek,T-eflon Virgin & Filled, NBR/Cotton.
Non-standard seals
We appreciate that many custom appliances require a non-standard solution, which is why we place great emphasis on matching our hydraulic seals to your specification. While we enjoy productive relationships with many major supply partners, we are not tied to one manufacturer. This gives our team the freedom to access many non-standard models and give you impartial advice on choosing the right hydraulic seal.
Size not listed or special requirements please click this link to Request a Price Quotate
High Pressure Chevron Seal is a three piece single acting chevron seal which is comprised by rubber fabric ring,POM energizer and PTFE back up ring.The combination makes it easy to be installed.
PRODUCT ADVANTAGES
? Capable of standing pressure changes
? Long service life
? Works in water and water-oil mixture media
? Easy installation
APPLICATION
High pressure cleaning equipment
| Material |
Power-transmission fluid |
TemperatureºC |
Speed |
Pressure |
Max.Gap F |
NBR Cotton
|
Mineral oil |
-30-+120 |
≤0.5m/s |
250bar |
F≤0.2mm |
| HFA5/95 Water Base fluid. Water |
+5-+60 |
|
|
|
Note:We also produce them with FKM+cotton and FKM+Kevlar for the fabric ring.
The above data are maximum values and cannot be used at the same time
Size not listed or special requirements please click this link to Request a Price Quotate
Audited Supplier 
){kind=link}